Camera Insurance UK

Volleychick asked:

I want to get more involved with my photography. I really like black and white photography but I also really like color photography. I want a digital camera. One that would work well with adobe photoshop elements 6 (that’s all I have right now). Any suggestions and links would be helpful. Also, I would want a camera where I could actually go to the store and buy it. I don’t want to buy it over the internet. Thanks!

iPhone insurance

I.M.N. Alias asked:

I am looking for a digital camera that will be used for a lot of at night or low-light shots as well as very close-up shots. Additionally, I would like a camera that is in the compact or ultra-compact category if possible. What are some suggestions for specific cameras, or, in general what features should I be looking for on cameras’ spec sheets that would tell me that the camera was good with low-light or up-close shots?

Contract Mobile phones

Foryourhome asked:

There are normally six things to look at before Selecting a CCTV security systems;

1. Camera Selection

2. Recording Options

3. Detection

4. Time and Date Stamping

5. Cable and Connectors

6. Camera Protection

1.0 Camera Selection

1.1 Location

Is the camera to be located indoors or outdoors? If outdoors then you need to ensure that it is appropriate for the environmental conditions that are likely to be encountered such as rain, snow, sun-glare, low light etc. Outdoor CCTV camera security systems Outdoor cameras should either be classed as weather resistant or mounted in a special enclosure to provide protection. All CCTV outdoor cameras provided by Voltek are weather resistant and the cable entry points are sealed. The leads are of sufficient length to enable connections to be made inside the building.

1.2 Light Levels

Choosing the right camera based on the amount of available light is very important for an effective security system. An ordinary colour or even monochrome camera will not give very good pictures in low light conditions although the monochrome will perform better than an equivalent colour one. Solutions available for low light conditions can include:

* B&W cameras with built in IR illumination

* Colour Day / Night cameras

* Use of additional security lighting

* Use of a separate IR illuminator in conjunction with a monochrome camera. When using IR illumination ensure that the range of the illuminators is adequate for your needs.

Light levels are usually measured in lux and although full daylight can be around 10,000 lux, dusk can be as low as 1-10 lux, complete darkness is 0 lux and side street lighting can also be less than 1 lux in some cases. The closer a camera is rated to 0 lux the better its performance in low light levels.

1.3 Colour, Black and White or Day Night Cameras

B&W cameras generally provide better image quality than colour ones at lower light levels. They are also usually cheaper than colour ones of equivalent specification. Colour cameras require the availability of good lighting and will generally provide better recognition capability. Day Night cameras provide the best of both worlds in an external environment. They operate as colour cameras during the day (or in good light conditions) and automatically change to B&W when the light levels drop. All Voltek Day Night cameras are supplied with built-in Infra-red illuminators which enable the cameras to see in darkness.

1.4 Wired or Wireless

Wireless CCTV cameras are easier to install. There is no cabling to run from the camera to the receiver and they are ideal for temporary applications, rapid deployment or where running cable is not desirable. TheDay Night wireless Security CCTV cameras cameras do however require a power source and whilst most will have the capability to be powered by batteries these do not have a very long life - a matter of hours in some cases. Wherever possible the cameras should be powered by the mains. Typical range for wireless camera systems is 100m free-space but this can reduce significantly to around 20 meters in a typical household environment. In some cases there is also the potential for interference when using wireless systems.

1.5 Visible Deterrence or Covert / Discreet Monitoring

For visible deterrence the use of larger cameras housed in traditional enclosures are ideal. For covert or discreet applications Voltek supplies Discreet or Covert CCTV security cameras that are:

* Very small and can be installed in covert locations, or

* In enclosures designed to disguise the presence of a camera.

Many of the cameras manufactured by Voltek are both stylish and discreet in the design of their enclosures and this makes them very suitable for domestic applications.

1.6 Audio

If the ability to monitor or record sound is important then the camera needs to have a built-in microphone. This enables one-way audio monitoring. Some cameras such as the SuperCam2 from Voltek have a 2-way speech facility that enables you to speak with your visitor without answering the door.

1.7 Camera Viewing Quality

The resolution, size and type of camera sensor will influence the quality of the viewable image.

Resolution – This is expressed as the number of television lines (TVL) that the camera is capable of producing. The higher the TVL value the greater the resolution and hence the quality of the images. A typical entry-level camera will be around 300 TVL with higher resolution cameras having a value of 400+ TVL.

Size – A larger image sensor will give a better image definition than a smaller sensor. For example, a 1/3” image sensor will produce a better image than a 1/4 ” sensor.

Type – There are 2 types of image sensor. CMOS sensors are mass-produced and used in entry-level cameras to provide cost savings. CCD sensors are used in professional CCTV cameras and provide a higher quality image.

It is important to remember that the quality of the recorder also influences the quality of the CCTV footage. For example, if you use a high-resolution camera but a low-resolution recorder then the CCTV footage that is captured will still be of low resolution.

1.8 Single Camera or Multiple Camera Systems

Do you need to protect and view a single area or multiple areas? If you are likely to require protection of additional areas at a future date then consider buying a system that can be expanded as and when required. Voltek has a range of products that will allow you to connect and use up to 4, 8 or even 16 cameras. These include:

Switchers - These are units that enable a multi-camera system to switch between the various cameras. The switching can be done in a number of ways:

* Manually by the user

* Automatic sequential switching between cameras

* Upon detection of movement by a PIR camera.

Multiple Security CCTV cameras with Switchers The cameras are connected to the switcher and the output from the switcher can be viewed on a TV or it can be connected directly to the recording device such as the VCR or DVD recorder. CCTV switchers can typically allow connection of upto 4 or 8 cameras. The Spectrum control units from Voltek also have additional built-in functionality such as automatic video activation and time and date stamp. It is important to remember however that using a switcher will only allow you to view and record one camera at a time.

Standalone DVRs - Use of digital video recorders allows single or multi-camera systems to be viewed and / or recorded simultaneously.

Voltek supplies a range of 4, 8 and 16 channel DVRs allowing you to install a very comprehensive cctv system.

PC-Based Security Systems - These make use of a PCI card that is fitted inside your computer. They will allow connection of upto 4, 8 or 16 cameras and help turn your existing PC into a sophisticated cctv system.

2.0 Recording Options

If you want to be able to record your CCTV footage then the following factors need to be taken into account:

* Maximum length of recording time required

* Quality of recording

* Method of recording:

o Continuous

o Manual

o Event Led - i.e. when your system detects motion

* Recording Equipment

o Analogue

o Digital

* Capability for storage, retrieval and transfer of cctv footage

2.1 Domestic VCR

This is a simple and low cost option that can provide good quality footage recorded in real time. VCRs can be used to provide continuous recording of up-to 8 hours or event led recording when used in conjunction with a PIR camera and a VCR activator. When using PIR cameras to carry out event led recordings you need to consider the start-up time for the VCR. For example, if the recorder takes a few seconds to actually begin recording each time it receives the signal from the camera then the event may have elapsed before it is recorded (a person walking across the camera range may have passed the field of view before the image is captured on tape). In these situations a separate PIR detector could be used to trigger the recording and overcome this problem. The other thing to bear in mind is that you cannot set the VCR to record a TV channel whilst the camera input is selected.

2.2 Domestic DVD Recorder

These operate on a similar principle to the domestic VCR but offer the additional benefits of:

* Higher quality digital recording

* Increased storage capacity

* Improved search and retrieval capability

However, for disk only recorders the start-up time before recording actually commences is generally longer than a VCR. To overcome this it is recommended that recorders with a built-in hard drive are used

2.3 Standalone Digital Video Recorders

These are rapidly becoming the most popular method of recording CCTV footage. Essentially a DVR is a standalone piece of hardware that is designed exclusively for recording CCTV footage. It has a number ofDigital Security camera recorders clear advantages over the traditional analogue systems and these include:

* Storage Capacity – Days, weeks and even months of high resolution recording is possible through use of large capacity hard drives

* Consistent Quality Recording – No deterioration of image quality no matter how many you overwrite onto the recording device or how long you store the images for

* Viewing and Retrieval – Quick and easy access of footage due to digital format

* Transfer and Storage – The digital format allows ease of transfer and storage of footage. Transfer and storage capability is further enhanced by DVRs with built-in CD writers and USB ports.

* Remote Access – Many DVRs have the capability for remote access from anywhere in the world through use of a remote PC

* Multiplexed Recording – Capability to view and record multiple cameras simultaneously.

2.4 PCI Cards

These are digital video capture cards that can be fitted inside your existing PC to allow the connection of multiple CCTV cameras. The functionality and benefits of PCI cards is very similar to that of DVRs.

3.0 Detection

Even with systems that have a very long recording capacity, it is not always desirable to record continuously. Event-led recording is a more efficient means of capturing relevant footage and can be achieved by:

3.1 PIR Movement Detectors

Some cameras have PIR detectors built-in and for those that don’t it is possible to install a separate PIR as part of the overall system. In multiple camera systems with PIRs the footage that is being displayed on screen will automatically change to the area that has detected movement.

3.2 Video Motion Detection

This is used in digital CCTV systems and works by analysing the video signal from a camera. Changes in signal are recognised as movement and subsequently used to trigger recording if required. All Voltek digital systems allow users to mark one or more rectangular areas within the display screen and only when motion is detected within these areas will the system begin recording. Where possible, use of PIR movement detection is preferable rather than video motion detection, as it more reliable particularly for external use.

4.0 Time and Date Stamping

This feature superimposes the time and date onto your CCTV footage. Having this feature can be really useful to identify when an event occurred and was recorded, particularly if the footage is to be used for evidence purposes. For domestic systems Voltek offers a separate time and date generator that can be added to your system. The Spectrum control CCTV securyty cameras has this facility already built-in. The facility is also integral to all the Voltek range of digital CCTV systems.

5.0 Cable and Connectors

Security camera wires connectors Cameras can be connected in a variety of ways. All our domestic cameras are supplied with 20m of cable and scart and / or phono plugs to connect directly into your TV, VCR or DVD recorder. All our professional cameras are supplied with 20m of cable and BNC connectors that will plug into our range of digital recorders. The Voltek camera leads can be extended upto 100m in total by the use of appropriate extension leads. Co-axial cable with a local power supply to the camera can enable the camera to be sited upto 250m away from the monitor or recording device. Detailed information on connectors and cable for each of the Voltek cameras is available on the relevant product page on the website.

6.0 Camera Protection

If your camera is likely to be a target for vandals then consider protecting it with one of Voltel wire cages is a Security camera wire cages

must. This not only saves your Security cameras from Vandalas but protects any evidences collected during the vandal acts.

We at For your Home along with Voltek really hope the following guide will help you in selecting the perfect security cameras for Your Homes and Gardens

Free Ringtones

Brooke Yan asked:

Digital cameras, which employ reusable memory cards instead of film, give you far more creative control than film cameras can. With a digital camera, you can transfer shots to your computer, then crop, adjust color and contrast, and add textures and other special effects. Final results can be made into cards or T-shirts, or sent via e-mail, all using the software that usually comes with the camera. You can make prints on a color inkjet printer, or by dropping off the memory card at one of a growing number of photofinishers. You can upload the file to a photo-sharing Web site for storage, viewing, and sharing with others.

Like camcorders, digital cameras have LCD viewers. Some camcorders can be used to take still pictures, but a typical camcorder’s resolution is no match for a good still camera’s.

WHAT’S AVAILABLE

The leading brands are Canon, Fujifilm, HP, Kodak, Olympus, and Sony; other brands come from consumer-electronics, computer, and traditional camera and film companies.

Digital cameras are categorized by how many pixels, or picture elements, the image sensor contains. One megapixel equals 1 million picture elements. A 3-megapixel camera can make excellent 8×10s and pleasing 11×14s. There are also 4- to 8-megapixel models, including point-and-shoot ones; these are well suited for making larger prints or for maintaining sharpness if you want to use only a portion of the original image. Professional Digital cameras use as many as 14 megapixels.

Price range: $200 to $400 for 3 megapixels; $250 to $400 for 4 and 5 megapixels; $300 to $1,000 for 6 to 8 megapixels.

IMPORTANT FEATURES

Most Digital cameras are highly automated, with features such as automatic exposure control (which manages the shutter speed, aperture, or both according to available light) and autofocus.

Instead of film, digital cameras typically record their shots onto flash-memory cards. CompactFlash and SecureDigital (SD) are the most widely used. Once quite expensive, such cards have tumbled in price–a 128-megabyte card can now cost less than $50. Other types of memory cards used by cameras include Memory Stick, Smart Media and xD-picture card. A few cameras, mainly some Sony models, use 3 1/4-inch CD-R or CD-RW discs.

To save images, you transfer them to a computer, typically by connecting the camera to the computer’s USB or FireWire port or inserting the memory card into a special reader. Some printers can take memory cards and make prints without putting the images on a computer first. Image-handling software, such as Adobe Photoshop Elements, Jasc Paint Shop, Microsoft Picture It, and ACDSee, lets you size, touch up, and crop digital images using your computer. Most digital cameras work with both Windows and Macintosh machines.

The file format commonly used for photos is JPEG, which is a compressed format. Some cameras can save photos in uncompressed TIFF format, but this setting yields enormous files. Other high-end cameras have a RAW file format, which yields the image data with no processing from the camera.

Digital cameras typically have both an optical viewfinder and a small color LCD viewer. LCD viewers are very accurate in framing the actual image you get–better than most of the optical viewfinders–but they use more battery power and may be hard to see in bright sunlight. You can also view shots you’ve already taken on the LCD viewer. Many digital cameras provide a video output, so you can view your pictures on a TV set.

Certain cameras let you record an audio clip with a picture. But these clips use additional storage space. Some allow you to record limited video, but the frame rate is slow and the resolution poor.

A zoom lens provides flexibility in framing shots and closes the distance between you and your subject–ideal if you want to quickly switch to a close shot. The typical 3x zoom on mainstream cameras goes from a moderately wide-angle view (35mm) to moderate telephoto (105mm). You can find cameras with extended zoom ranges between 8x and 12x, giving added versatility for outdoor photography. Other new cameras go down to 24 or 28 mm at the wide-angle end, making it easier to take in an entire scene in close quarters, such as a crowded party.

Optical zooms are superior to digital zooms, which magnify the center of the frame without actually increasing picture detail, resulting in a somewhat coarser view.

Sensors in digital cameras are typically about as light-sensitive as ISO 100 film, though some let you increase that setting. (At ISO 100, you’ll likely need to use a flash indoors and in low outdoor light.) A camera’s flash range tells you how far from the camera the flash will provide proper exposure: If the subject is out of range, you’ll know to close the distance. But digital cameras can tolerate some underexposure before the image suffers noticeably.

Red-eye reduction shines a light toward your subject just before the main flash. (A camera whose flash unit is farther from the lens reduces the risk of red eye. Computer editing of the image may also correct red eye.) With automatic flash mode, the camera fires the flash whenever the light entering the camera registers as insufficient. A few new cameras have built-in red-eye correction capability.

Some cameras that have powerful telephoto lenses now come with image stabilizers. These compensate for camera shake, letting you use a slower shutter speed than you otherwise could for following movement. But an image stabilizer won’t compensate for the motion of subjects.

Most new 6- to 8-megapixel cameras come with full manual controls, including independent controls for shutter and aperture. That gives serious shutterbugs control over depth of field, shooting action, or shooting scene with tricky lighting.

HOW TO CHOOSE

The first step is to determine how you will use the camera most of the time. Consider these two questions:

How much flexibility to enlarge images do you need? If you mainly want to make 4×6 snapshots, a camera with a 3- or 4-megapixel resolution will be fine. Such a camera will also make an 8×10 print of an entire image without alteration that looks as sharp as one from a 6- or 8-megapixel model. But to enlarge the image more or enlarge only part of it, you’ll want a 6- to 8-megapixel camera.

How much control do you want over exposure and composition? Cameras meant for automatic point-and-shoot photos, with a 3x-zoom lens, will serve snap shooters as well as dedicate hobbyists much of the time. The full-featured cameras in the 6- to 8-megapixel range offer capabilities that more-dedicated photographers will want to have. Two of the more important capabilities are a zoom range of 5x to 10x or more, which lets you bring distant outdoor subjects close and also lets you shoot candid portraits without getting right in your subject’s face, and a full complement of manual controls that you determine the shutter speed and lens opening. ‘

Once you’ve established the performance priorities that you need from a camera, you can narrow your choices further by considering these convenience factors:

Size and weight. The smallest, lightest models aren’t necessarily inexpensive 3-megapixel cameras. And the biggest and heaviest aren’t necessarily found at the high end. If possible, try cameras at the store before you buy. That way, you’ll know which one fits you hand best and which can be securely gripped. In our tests, we have found that some of the smallest don’t leave much room even for small fingers.

Battery type and life. All digital cameras can run on rechargeable batteries of one of two types: an expensive battery pack or a set of AA batteries. In our tests of the cameras, neither battery type had a clear performance advantage. The best-performing cameras offer upward of 300 shots on a charge, while the worst manage only about 50. We think it’s more convenient to own a camera that accepts AA batteries. You can buy economical, rechargeable cells (plus a charger) and drop in a set of disposable lithium or alkaline batteries if the rechargeable run down in the middle of the day’s shooting.

Camera speed. With point-and-shoot cameras like the ones we tested, you must wait after each shot as the camera processes the image. Most models let you shoot an image every few seconds, but a few make you wait 5 seconds or more. They may frustrate you when you’re taking photos in sequence.

Your other cameras. If you’re adding a camera to your lineup or trading up to a more versatile model, look first for one that’s compatible with the other cameras. If it is, you can share memory cards and batteries. Designs within a camera brand line are often similar. So staying wit the brand you have lowers the learning curve on the new camera for family members who switch between cameras.

Copyright © 2002-2006 Consumers Union of U.S., Inc.

For the latest information on this and many other products and services, visit www.ConsumerReports.org.

digital cameras with Easy Deal

ShopNdeal.com

Free Ringtones

Amanda asked:

I am interested in attending photography seminars for wedding photography, portrait photography, etc, and am wondering if anyone knows of a website or somewhere I could find out when and where they are held. I live near the Milwaukee area. Thanks!!!

Camera insurance

By aldrin garcia

My top 20 key questions to ask yourself when buying a digital camera.

1. How many “megapixels” /resolution?

Once and for all, at least to me, you have to get the highest resolution your money can buy at the time you buy. Period.

2. Who made the lens?

Most cameras will give you an idea where the lens was made just by looking at the front of the lens. Know if the lens of your camera came from a reputable company like Leica, Zeiss, Canon, Etc… Lens quality is one of the most important factors you should consider especially if you’re going to use it for commercial, technical or scientific purposes.

3. Will I need interchangeable lenses? How many are available for my specific camera in mind?

Having the option of interchangeable lenses gives you the freedom to experiment with different kinds of focal lengths. Although some P&S (point and shoot) cameras can rival DSLR’s with a generous zoom range for a non interchangeable lens system.

Also note the number of lenses available for use with your specific camera because of flexibility reasons. You can practically cover the entire “zoom range” with interchangeable lenses versus modest zoom ranges on non interchangeable lens systems or P&S cameras.

4. Does it have a zoom capability? What’s the range?

Almost all applications that I listed above will need some form of zooming in (telephoto) or out (wide angle), especially if you don’t have the space to move around the object you are shooting.

For Landscape shots, wide angle shots are very common and appealing while zooming in on the details serves as a break and complements the wide angle shots.

For weddings and events, you need a zoom because there will be times where you are limited by the shooting space and you will have a difficult time moving around. Its a good thing to know that you can do all sorts of framing without even moving from your position.

A nice zoom will give you the efficiency and versatility in your photography, so my suggestion is to go for the longest range you can get (usually from a 7X to a 10X for Point and Shoots).

Also note the speed of zooming in or out as this will be a factor if you’re shooting events like weddings. You will fail to capture that “decisive moment” on a mediocre zoom speed.

5. Does it have the provision to capture raw images?

Many photographers will say you’ll need this digital camera feature if you want to have big prints from your pictures. Although this is correct, the main reason why you will want this is because of the benefit it will give you…pure total control of your pictures… from exposure, color, metadata, hdr and a lot more.

6. Can I attach an external flash?

Having an external flash capability will give you the power and creative freedom to light your subjects any which way you like.

You can connect your digital camera to all sorts of lighting equipment thus giving you more options and versatility. This comes in the form of a hotshoe or a PC-Sync socket.

If your digital camera doesn’t have this feature, there is still hope because accessories called flash slaves are being sold by third party companies in different flavors that will also do the same job more or less.

7. Does it have a tripod socket?

Some of the most beautiful landscape pictures that I’ve seen are undoubtedly made with a tripod, so this is a must have if you are planning to do this kind of photography.

The “available light shots” in a wedding, still life and product shots, studio and fine art shots … all need a tripod for successful execution… so guess what happens if you don’t have a tripod socket?… You cannot effectively use a tripod!

8. Does it have automatic and manual focusing?

It will not be evident at first why you’ll need this especially if you’re just starting out in photography. But if you’re like me… A total control freak when it comes to cameras… and you really want to express your creative side, this is definitely a must have.

9. Can you attach filters to it? and what filter size?

Creative expression through special effects is just one of the many reasons that makes photography fun and interesting, and experimenting with filters is one creative pursuit you should try with your photography especially if you’re a beginner.

Always remember to ask if the particular digital camera you are eyeing for can handle filters and ask for the filter size. (To save you from buying the right filter with the wrong filter size) Please note that most Digital SLRs should be able to to handle filters as most lenses that come with it have a filter thread built into the lens.

Most P&S (point and shoot) digital cameras normally doesn’t have a filter thread built-in and might need special accessories to accomplish this so you should check to know for sure.

Again, there are many third party accessories that you could buy to adapt filters to your P&S digital cameras that don’t have this provisions. I’ll discuss all about this in a future post so watch for it. (Or subscribe to my announcement list (feed via email) so you’ll know when it’s up.

10. Can I upgrade the firmware?

The good thing about some digital camera manufacturers is that they keep on improving their digital cameras even after they sold it to you… this comes in the form of a firmware upgrade.

Usually this involves an improvement on one or many features of a camera. Be sure that the digital camera you’re planning to buy has an easy way of upgrading its firmware. This comes in the form of either an easy download via the manufacturer’s website (find it and bookmark it now) or a FREE CDROM.

Another caveat - be sure to consider if a downgrade is also possible or available with your digital camera… Why is there a need a downgrade you ask?… Because, you may want to reinstall an earlier firmware… just in case you don’t like the results from a firmware upgrade.

Occasionally there’s a feature that will be removed by the upgrade that you failed to read about and you decided that you just want to keep that feature instead of a bunch of trivial upgrades from the new firmware. (Yes, I personally experienced this.)

11. Are there extra goodies or software that come with it?

Some people ignore the fact that you can save a lot of money just by doing a simple arithmetic. Did you know that you could actually get your digital camera for a lot less if you study the deals and offers on the marketplace?

If you buy a digital camera and it comes with software that you can really use… like photoshop, elements, or any other image editing software for that matter, then you already saved some money you would otherwise spend. Some dealers will throw in lots of extras… If you just simply ask.

Always try to ask for these things that you’ll end up buying anyway if you don’t - like camera bags, extra lenses, extra batteries, memory cards, tripod, lens cleaners etc. Trust me… you will end up buying these things if you don’t ask for it on the deal. What have you got to lose? Simply ASK. Would you believe that I effectively lowered one of my camera purchase cost by as much as 30%? Ask away.

12. Is there Local Support in your area?

Finding the answer to this one will give you a great benefit in the long run. Wouldn’t you sleep better at night because you feel that extra security - that in case there is something wrong with your digital camera, you can bring it in for repair at a moments notice?

Not knowing when your camera will be repaired (or if it even arrived at a distant repair facility) is one of the worst feelings a photographer can have especially if you’re in the middle of a photoshoot or project.

13. What type of warranty does it have? Worldwide / Countrywide?

If you travel a lot its good to know that a countrywide or even better - a worldwide warranty can get your camera fixed wherever you are. Always bring the warranty card and glue it on your camera bag.

14. Does it have the ability to take video and audio?

I know, most DSLRs don’t have this function. But some non interchangeable lens DSLRs have it. This is a very useful feature to have if you’re on a project or photoshoot and want to document or record a procedure, a moment, or an idea that you would otherwise have trouble remembering or even writing. It’s always a good idea to bring a P&S camera backup that have this function.

The things that you could do with audio and videoclips on a photoshoot are only limited by your imagination… interviews, documentation, funny quips, training procedures, bloopers, etc..

15. Does it have a manual white balance?

White balance is one of the most interesting aspects of digital cameras. Its fun and fascinating to work with. Having this option puts the photography fun-o-meter way way up. In future posts, I will be discussing white balance in detail so be sure to stay tuned.

16. How sensitive is it to infrared?

If you’re planning to make infrared pictures or enter the exciting world of Infrared fine art photography then you’ll want to know if your digital camera can do it.

TIP: There is a simple way to test how sensitive your digital camera is to infrared using a very common device - a TV remote control. For P&S, you can aim the remote control towards the lens and gauge how bright the LED from remote is. This should give you an idea how sensitive your digital camera is to infrared. For DSLRs you will need to take shots of the LED and experiment a little or you can simply research or google the particular camera model you have in mind for other people’s experiences and thoughts about it.

17. How high is the ISO sensitivity? Is it manually adjustable?

ISO sensitivity is a term referring to the sensitivity of film to light. In the digital camera world, it refers to the sensitivity of the electronic sensor in your digital camera in relation to the ISO standard used for film.

The higher the ISO sensitivity of your camera the faster or better it can record a specific amount of light.

High ISO sensitivity is useful for taking better pictures in dark settings… such as inside a church or at night. The higher the ISO setting, the more details you can capture of a dark scene.

One caveat - take note of the amount of noise a particular camera exhibits at higher ISOs. Some people like it and some don’t. Again, don’t be afraid to ask or do research on the noise characteristics of your camera model in mind to see if this is the right choice for you.

18. How high or low can you set the shutterspeed? What are the minimum and maximum aperture settings?

Shutterspeed and aperture settings are the basic mechanisms that drive your camera and controls the amount of light that is exposed by the film or image sensor.

You use high shutterspeeds in action shots and to prevent camera shake, and you use low shutterspeeds for movement effects and bulb or long exposures. You can check for these figures on the websites that I gave you in part 1. You can see it in the technical specifications for a particular camera.

A bulb or “T” function is a nice feature to have because you can take exposures for virtually very long periods of time. Another feature to have is if your camera has a remote control to use this bulb or “T” mode. This gives you the capability to take pictures without holding your camera and adding to the “camera shake”.

With the subject of apertures, a small one (small aperture opening) lets you have a wider depth of field so your shots are sharp from near to far versus a large aperture (big aperture opening) where your shots have a narrow depth of field and appear “selectively focused”.

19. Does it have some form of an image stabilizer?

New cameras coming out as we speak often have this feature. Simply put, an image stabilizer is some form of a mechanism built into the lens or the camera body (depending on the manufacturer and their implementation) that basically prevents you from getting blurred pictures when taking pictures in low light or you are using a long or telephoto lens. Having this feature can mean the difference between a blurry picture (aka no picture!) to a usable one.

20. How close can it focus? Macro abilities?

The closer your camera can focus… the bigger the picture of an object you can take in relation to the image dimensions of the final photo… and the bigger the picture of the object… the more detail you can get. If you want to take pictures of small objects such as flowers and fine details then this is a must-have.

That’s it. Whew.

Do you really have to go over all these questions?… Of course not, but even if you only study and ponder on half of them…and take the time… I promise you that one thing will surely happen…

You’ll be…

a lot smarter!

than when you first started asking these questions… ergo you’ll be in a better position to decide what digital camera to buy… Because you are now armed with the most powerful tool anybody can have

the power of information!

In any case, I hope you find as much value in these questions as many of my friends have and be able to get the camera of your dreams.

Enjoy!

iPhone insurance